Oil Absorbent Bag Filters
TRINITY Oil Absorbent Bag Filters are manufactured with multi-layer construction offering high dirt loading, oil absorption and low differential pressure drops. Made with polypropylene micro-fiber these Sterile Liquid Filters offer excellent chemical compatibility and a high level of filter efficiency.
Oil Absorbent Bag Filter
TRINITY Oil Absorbent Bag Filters are manufactured with multi-layer construction offering high dirt loading, oil absorption and low differential pressure drops. Made with polypropylene micro-fiber these Sterile Liquid Filters offer excellent chemical compatibility and a high level of filter efficiency.
OIL ABSORBENT BAG FILTERS
TRINITY Oil Absorbent Bag Filters are manufactured with multi-layer construction offering high dirt loading, oil absorption and low differential pressure drops. Made with polypropylene micro-fiber these Sterile Liquid Filters offer excellent chemical compatibility and a high level of filter efficiency.
Trinity Oil Absorbent Bag Filters offer effective oil removal properties from Process Fluids applications. With this new unique design helps to provide one of the highest capacity Sterile Liquid Filters.
The different layers of Micro Fibers not only retain oil, but increases overall efficiency on micron rating ranging from 1 to 50. This bag is also designed to fit into any standard size # 1 or # 2 Liquid Bag Housing and also 7 inch Plastic Flange which creates more positive seal and is 100% Recyclable.
The degree of effectiveness of these Sterile Liquid Filters is dependent on the type of oil as well as the differential pressure across the bag filter media. The greater the differential pressure the greater the propensity for the oil droplet to deform, and migrate downstream hence it is always advisable to use these Oil Absorbent Bag Filters within the specified parameters recommended.
| Property | Details |
|---|---|
| Media | Polypropylene |
| Removal Ratings | 0.5, 1, 2, 5, 10, 25, 50, 75, 100, 150, 200, 250 Micron |
| Operating Conditions | |
| Maximum Operating Temperature | Polypropylene – 80°C |
| Maximum Change-Out Differential Pressure | 20 PSID (3.5 bar) |
| Recommended Change-Out Differential Pressure | 15 PSID (2.5 bar) |
| Dimensions | |
| Lengths | 16", 32" |
| Diameter | 4" (102 mm), 7" (178 mm) |
| Property | Details |
|---|---|
| Nominal Lengths | 20, 40 & 60 inches |
| Diameter (ID / OD) | 3” (76 mm) / 6.5” (165 mm) |
| End Connections | DOE (standard) / SOE (optional) |
| Max Operating Temperature | 80°C |
| Max Change Out Differential Pressure | 50 PSID (3.5 bar) |
| Recommended Change Out Differential Pressure | 35 PSID (2.5 bar) |
Applications
- Automotive & Painting
- cooling systems
- Filters out tramp oils from coolants and metalworking fluids
- Chemical & Petrochemical